SE Vans PK Ripper Looptail BMX Bike Red 2021 Collector

FEATURES

• Vans edition 6061 aluminum PK Ripper frame w/ floval tubing, looptail rear end, seatstays wrap, Diamond Dropouts
• Limited Edition & Individually Numbered on the Inside of the Rear Dropout
• Full Cr-Mo "Off the Wall" Landing Gear forks
• Cr-Mo Power Wing bars
• Vans x Cult Grips with rubber SE end plugs
• Vans x Cult 20" x 2.1" Tires
• Double-wall rims with sealed bearing SE Mohawk hubs
• Vans Checkerboard Padset, '66 Dice Valve Caps, Alloy Rear Wheel Washers
• 24 pounds

SPECIFICATIONS

• FRAME: Vans Edition, 6061 Aluminum Floval Tubing, Looptail Rear End, Seatstays Wrap, Retro Diamond Shape Dropouts, 68mm American Bottom Bracket, Limited Edition & Individually Numbered on the Inside of the Rear Dropout
• FORK: "Off the Wall" Landing Gear, Full Cr-Mo
• CRANKSET: SE TSC Cranks, 180mm, Sealed Bearing American Bottom Bracket, 141mm Spindle Length, 19mm Spindle Diameter, Alloy Spider, 44T Alloy Chainring
• PEDALS: X-Pedo Low-profile Platform w/ Removable Pins
• CHAIN: KMC Z6
• WHEELSET: Sealed Bearing SE Mohawk Hubs, 36H High-Flange Alloy, w/ Double-wall Rims, 16T Freewheel, Stainless Spokes
• TIRES: Vans x Cult Tires, All Over Tread Design, Vans Waffle Sole Pattern, 20" x 2.1" Front & Rear
• BRAKESET: Tektro C-310 V-Brake, Slick Cable
• BRAKE LEVERS: Tektro 316A, 2-Finger Alloy
• HEADSET: Aluminum Cups, 1-1/8" Threadless, SE Wing Logos on Bottom Cup
• HANDLEBAR: Cr-Mo Power Wing, 29" x 8.25", 10° Backsweep, 1° Upsweep
• STEM: Retro Alloy Top-Load w/ Engraved SE Logo on Top & Sides, Hidden Top Cap, 55mm Reach
• GRIPS: Vans x Cult Grips, Waffle Sole Pattern, Made in USA
• BRAKESET: Tektro C-310 V-Brake, Slick Cable
• BRAKE LEVERS: Tektro 316A, 2-Finger Alloy
• HEADSET: Aluminum Cups, 1-1/8" Threadless, SE Wing Logos on Bottom Cup
• HANDLEBAR: Cr-Mo Power Wing, 29" x 8.25", 10° Backsweep, 1° Upsweep
• STEM: Retro Alloy Top-Load w/ Engraved SE Logo on Top & Sides, Hidden Top Cap, 55mm Reach
• GRIPS: Vans x Cult Grips, Waffle Sole Pattern, Made in USA
• SEAT: SE Racing Old School
• SEATPOST: Micro-Adjust Alloy, 27.2mm
• SEAT CLAMP: SE Racing Champ Clamp, Alloy, 31.8mm Inner Diameter
• ACCESSORIES: Vans Checkerboard Padset, '66 Dice Valve Caps, Alloy Rear Wheel Washers
• WEIGHT: 24 lbs / 10.86 kgs

GEOMETRY

• TOP TUBE, ACTUAL: 21"
• SEAT TUBE, CENTER TO TOP: 10.2"
• SEAT TUBE ANGLE: 71°
• HEAD TUBE ANGLE: 74°
• CHAINSTAY LENGTH: 14.75"
• WHEELBASE: 37.7"
• BOTTOM BRACKET HEIGHT: 11.7"
• STANDOVER: 22.5"
• SUGGESTED RIDER SIZE: 5'3"+ (160cm+)
• STEM: 55mm
• HANDLEBAR WIDTH: 28.5"
• CRANK: 180mm
• WHEEL SIZE: 20"
• SEAT POST DIAMETER: 27.2mm