SE DJ Ripper 26" BMX Bike
Pre- Order for End of November
A PK Ripper like you've never seen before! The 26" DJ Ripper takes the design elements of the classic PK Ripper and wraps them into a 26" dirt jumper that will blow your mind. The frame features our legendary Floval tubing, Looptail rear end, and tapered head tube. The frame is then matched up with Manitou Circus Sport forks, 25-12 gearing with outboard BB, Avid BB5 disc brake, 31.8mm stem & bars, and an SE Pivotal seat.
- BLACK: 6061 Aluminum Floval Tubing, Symmetrical Looptail Rear End, 1-1/8"-1.5" Tapered Integrated Head Tube, Seatstays Wrap,Disc Brake Tabs, 73mm Euro Bottom Bracket, 135mm Spaced Dropouts
- FORK: Manitou Circus Sport, 100mm Travel, 1.5" Tapered Steerer Tube, Fluid Flow Dampinng, Firm Spring
- CRANKS: SE V-Ridge 3-pc Cr-Mo, Cranks, 175mm, Outboard Sealed Euro Bottom Bracket, 160mm Spindle Length, 19mm Spindle Diameter, 25T Alloy SE Racing Sprocket
- PEDALS: X-Pedo Low-profile Platform w/ Removable Pins
- CHAIN: KMC S1
- WHEELS: Alloy 32H Nutted Hubs, Sealed Rear, 100mm Front Hub & 135mm Rear Hub, w/ 35mm Double-Wall Rims, 12T Cassette, Stainless Spokes
- TIRES: Vee Tire Co Two Six DJ, 26 x 2.25" Front, 26 x 2.125" Rear
- BRAKES: Avid BB5, Mechanical Disc, Easy to Adjust w/ Tri-Align Caliper Positioning System, 160mm Rotor
- LEVERS: Tektro MT2.1, 2-Finger Alloy
- HEADSET: FSA NO.42/ACB-A Sealed 1-1/8"-1.5" Tapered, Integrated Headset
- BARS: 6061 Aluminum, 29" x 2.5", 10° Backsweep, 2° Upsweep, 31.8mm Clamp Area
- STEM: Alloy Front Load, Light Weight Cutouts, 31.8mm Clamp, 40mm Reach
- GRIPS: Special Edition ODI Mushroom II Dual-Ply Grips, Made in USA, w/ SE Donuts,
- SE Pivotal Seat w/ PaddingSEAT:
- POST: Pivotal Alloy, 27.2mm
- CLAMP: SE Racing Champ Clamp, Alloy, 31.8mm Inner Diameter
- EXTRAS: SE Racing Wing Top Tube Pad, Alloy Valve Caps
- WEIGHT: 28.8 lbs / 13.06 kgs
- Top Tube, Actual 22.8"
- Seat Tube, Center To Top 12.8"
- Seat Tube Angle 71
- Head Tube Angle 69
- Chainstay Length 15.4"
- Wheelbase 41.6"
- Bottom Bracket Height 13.2"
- Standover 29.5"
- Suggested Rider Size 5'3"+ (160cm+)
- Stem 40mm
- Handlebar Width 29"
- Crank 175mm
- Wheel Size 26"
- Seat Post Diameter 27.2mm